2W High Power RF Power Amplifier with 2.4G & 5.8G Dual Band WiFi Signal Booster for DJI Yuneec 3DR UAV Signal Enhancer

1
MOQ
Please consult a sales engineer
fiyat
2W High Power RF Power Amplifier with 2.4G & 5.8G Dual Band WiFi Signal Booster for DJI Yuneec 3DR UAV Signal Enhancer
Özellikleri Fotoğraf Galerisi Ürün Açıklaması Fiyat talebi
Özellikleri
Teknik Özellikler
İşletim aralığı: 2,4~2,5 GHz, 5,0~5,875 GHz
Giriş gücü: 0~20 dBm
Çıkış Gücü: 2W (33dBm)
Güç Kaynağı: 5V~16V/2ADC
Çalışma Sıcaklığı: -20°C ila +70°C
Güçlendirici Boyutu: 9,7x5,2x1,1 cm
Vurgulamak:

2W High Power RF Power Amplifier

,

2.4G & 5.8G Dual Band WiFi Signal Booster

,

DJI Yuneec 3DR Compatible UAV Signal Enhancer

Temel bilgiler
Menşe yeri: Çin
Marka adı: UND
Model numarası: U-G2WP
Ödeme & teslimat koşulları
Teslim süresi: 5-8 gün
Ödeme koşulları: T/T
Yetenek temini: 100
Ürün Açıklaması
WiFi 2W High Power RF Power Amplifier for Drone and Prison Applications
This 2.4G/5.8G WiFi 2W High Power RF Power Amplifier is engineered for IEEE 802.11b/g/n Wireless LAN applications. The product utilizes time division duplexing (TDD) methodology and advanced microwave detection technology to deliver high linearity amplification. Compatible with most WLAN/Wi-Fi devices, this signal booster enhances WLAN signal strength, resulting in expanded coverage area and more stable transmission rates.
Compatibility: Specifically designed for UAV and drone applications, this amplifier works perfectly with DJI, Yuneec, 3DR, XIRO, Parrot, JTT, and Blade systems. Also suitable for active speakers, routers, and similar wireless devices.
Key Features
• 2.4GHz & 5.8GHz dual frequency with automatic switching
• Wide voltage range support: 5-16V
• Maximum output power: 2000mW
• Compact design optimized for remote control equipment including model aircraft and drones
Technical Specifications
Parameter Specification
Operating Range 2.4~2.5 GHz, 5.0~5.875 GHz
Operating Mode Bi-directional, half-duplex, time division duplex senses RF, carrier from transmitter and automatically switches between receiving and transmitting modes
Input Power 0~20 dBm
Transmit Gain 15-18dB
Output Power 2W (33dBm)
Receiver Gain ≤ 12 dB
Noise Figure ≤3.5 dB typical
Frequency Response ±1dB over operating range
Connector Type SMA Receptacle 50ohm, To radio SMA female (hole inside), To antenna RP-SMA female (pin inside)
Power Supply 5V~16V/2A DC
Operating Temperature -20°C to +70°C
Operating Humidity Up to 75% relative humidity
Material Cast Aluminum
Booster Size 9.7 x 5.2 x 1.1 cm
Booster Weight 77g
Önerilen Ürünler
Bizimle temasa geçin
İlgili kişi : Susan
Tel : +8613991372145
Kalan karakter(20/3000)