Xian Unuodi Intelligent Technology Co., Ltd. Quality Control

All our products undergo the following quality inspections before leaving the factory:

1. Enclosure Protection Level Test

For products rated at IP6X, we follow the standards set by GB/T 4208-2017 on enclosure protection (IP code). Talcum powder is filtered using a metal square mesh sieve (wire diameter: 50 μm, mesh size: 75 μm) with a dosage of 2 kg/m³, applied no more than 20 times. No vacuum pump is used during the process. The dust test runs for 8 hours.Afterward, the sample is submerged 1 meter underwater for 30 minutes, ensuring the temperature difference between the water and the test environment does not exceed 5K.

2. Electrostatic Discharge (ESD) Protection Test

This test follows GB/T 17626.2-2018, which covers electromagnetic compatibility and electrostatic discharge (ESD) immunity. Each unit undergoes 10 discharges under both positive and negative voltages, across different voltage levels, to verify resistance to electrostatic interference.

3. Aging Test

Before shipment, each device is subjected to a 48-hour aging test, where it operates at maximum power in a sealed high-temperature aging chamber. This process ensures the product’s long-term stability and performance under extreme conditions.

4. Final Quality Inspection

We implement a rigorous and standardized inspection protocol to ensure that every product meets delivery standards. This comprehensive process guarantees product consistency, reliability, and superior performance in field applications.

The quality control of anti-drone equipment should run through the entire process:

• R&D Phase: Simulation tests such as electromagnetic compatibility (EMC) and jamming frequency accuracy are conducted to verify design reliability.
• Supply Chain Side: Incoming quality inspection (IQC) is carried out for core components (e.g., power amplifiers, signal processors).
• Production Phase: Automated welding process monitoring and assembly precision calibration are implemented.
• Finished Product Phase: A full range of tests must be passed, including power output stability, multi-target jamming effectiveness, and adaptability to high-low temperature and vibration environments.
• Post-Sales Traceability: A unique product identification system is established to enable post-sales quality traceability, ensuring the equipment's jamming effectiveness and operational safety in complex scenarios.